HP Integrity rx6600 Rack to Pedestal Conversion Guide - HP Integrity rx6600 Se - Page 18

Removing the Bezel Cover, Removing the Caster Wheels, Lock Release Slot

Get HP Integrity rx6600 PDF manuals and user guides View all HP Integrity rx6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Figure 3-2 Lock Release Slot 1 1 Lock Release Slot Flip the procedure on the other side. Removing the Bezel Cover To remove the bezel cover: 1. Release the locking tabs behind the right corners of the bezel cover. See Figure 3-3. 2. Pull the cover away from the server. Figure 3-3 Locking Tab 1 1 Locking Tab Removing the Caster Wheels 1. Turn the server onto its right side. WARNING! Be careful when lifting the server as it is heavy. CAUTION: Be sure the server handles are in (against the server) to prevent damaging the handles. The server will be slightly more difficult to turn on its side with the caster wheels attached. 2. With the left side facing up, lift up the two metal tabs holding the caster wheel assemble in place. 3. With the tabs lifted, pull down on the caster wheel until they slide off. See Figure 3-4. 4. Repeat for the second wheel. 18 Pedestal to Rack Conversion

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Figure 3-2 Lock Release Slot
1
1
Lock Release
Slot
Flip the procedure on the other side.
Removing the Bezel Cover
To remove the bezel cover:
1.
Release the locking tabs behind the right corners of the bezel cover. See
Figure 3-3
.
2.
Pull the cover away from the server.
Figure 3-3 Locking Tab
1
1
Locking
Tab
Removing the Caster Wheels
1.
Turn the server onto its right side.
WARNING!
Be careful when lifting the server as it is heavy.
CAUTION:
Be sure the server handles are in (against the server) to prevent damaging the
handles.
The server will be slightly more difficult to turn on its side with the caster wheels attached.
2.
With the left side facing up, lift up the two metal tabs holding the caster wheel assemble in
place.
3.
With the tabs lifted, pull down on the caster wheel until they slide off. See
Figure 3-4
.
4.
Repeat for the second wheel.
18
Pedestal to Rack Conversion