HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For D - Page 15
Completing the Installation of a Hard Disk Drive, When a New SCSI, Hard Disk Drive Is, Installed
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation Installing Mass Storage Devices 11 Lower the hard drive unit back into the PC Workstation's case and tighten the four (outer) retaining screws. When a New SCSI Hard Disk Drive Is Installed 12 Install any other accessories before completing the installation. 13 Follow the instructions below to complete the installation. Completing the Installation of a Hard Disk Drive 1 Switch on the computer. 2 To enter the SCSI Configuration Utility press F6 when the message Press F6 to start Configuration Utility... is displayed during the PC Workstation's start-up routine. 3 Verify or modify the configuration of your new SCSI hard disk drive. For more information on configuring a SCSI hard disk drive, refer to the SCSI Administrator's Guide available on HP's Web site at http://www.hp.com/go/kayaksupport. 4 When configuration is complete, exit the SCSI Configuration Utility and re-boot the computer to save any changes. English 15
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-accessories-installation-guide-desktop-models-4839b7a/15.png)