HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For D - Page 21
other boards., with the socket and does not touch components
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation Installing Accessory Boards 4 Unscrew and remove the slot cover. Store it in a safe place. If the slot cover is tight, loosen the screws on the adjacent slots. 5 Hold the board by its "top" edge. Slide it into the board guide of the chosen slot. Do not bend the board. Slide the accessory board into position 6 Align the board's connector with the slot's socket. Firmly press the board into the socket. Ensure the board's connector engages completely with the socket and does not touch components on other boards. 7 Secure the board by replacing the screw. If you loosened the screws on adjacent slots, remember to tighten them. 8 Install any other accessories before replacing the cover (refer to page 4). 9 Reconnect all cables and power cords. English 21