HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For D - Page 7
Installing Memory, Main Memory Modules
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CAUTION HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation Installing Memory Installing Memory Main Memory Modules If you need more main memory to run your application software, you can install up to 768 MB of memory in three 100 MHz DIMM slots. Main memory upgrades are available in single non-buffered 32 MB, 64 MB and 128 MB or 256 MB SDRAM memory modules. Static electricity can damage electronic components. Turn off all equipment. Do not let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the power supply while you are removing the accessory from the bag. Handle the accessory as little as possible and with car To install a main memory module: 1 Disconnect the computer's power cord and any LAN or telecommunications cable. 2 Remove the computer's cover (refer to page 3). 3 Press the retaining buttons on each side of the HP UltraFlow airflow guide and remove it from the PC Workstation's case. Lift the HP UtraFlow airflow guide forwards and upwards. English 7
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-accessories-installation-guide-desktop-models-4839b7a/7.png)