HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For D - Page 19
When an IDE CD-ROM, Drive Is Installed, Completing the Installation of a Drive
![]() |
View all HP Kayak XA 05xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation Installing Mass Storage Devices 10 Remove the plastic panel from the cover by pulling the panel from the left and unhinging its right-hand side. Store the panel in a safe place. Unclip and lift out the plastic panel. 11 Install any other accessories before replacing the cover and completing the installation. 12 Follow the instructions below to complete the installation. Completing the Installation of a Drive When an IDE CD-ROM Drive Is Installed 1 Switch on the computer and press F2 when F2 Setup appears. 2 In the Setup program, select the Advanced menu, the IDE Devices submenu. Check that the CD-ROM drive has been detected on the IDE channel. 3 Press F3 to save and exit the program. English 19
![](/manual_guide/products/hewlettpackard-kayak-xa-05xx-hp-kayak-xa-series-05xx-accessories-installation-guide-desktop-models-4839b7a/19.png)