HP Kayak XU 04xx HP Kayak XU Series 04xx, Familiarization guide - Page 10

Removing and Replacing the Cover Removing and Replacing the Cover WARNING: For your safety, never remove the PC's cover without first removing the power cord from the power outlet, and any connection to a telecommunication network. Always replace the cover before switching on the PC again. Removing the Cover Ž Œ Switch off the display and computer. Œ Disconnect all power cords, LAN or telecommunications cable and accessory cables. If necessary, unlock the cover. The lock and key for the cover are at the back of the PC Workstation, just below the rear panel connectors.  Lift the two latches on the front sides of the computer upwards. Ž Grasp the cover on the sides at the  back of the computer and slide it forwards  and off the computer. Replacing the Cover Œ Ensure that the two latches on the front sides of the cover are lifted up, and that the lock is unlocked. Slide the cover onto the computer, making sure that the two guides at the bottom of the case slide into the two rails at the base of the computer. Firmly slide the cover backwards into position.  Lower the two latches on the front sides of the cover. Ž If required, lock the cover using the key. If required, lock the cover using the key. Reconnect all power cords, LAN or telecommunications cable and accessory cables. 10 Ž  Œ 