HP Kayak XU 04xx HP Kayak XU Series 04xx, Familiarization guide - Page 16

Removing and Replacing the Base Bezels Removing and Replacing the Base Bezels Removing the Base Bezels Œ Lay the computer on its side.  (a) On the side base bezel, push the two tabs upwards, then pull the base bezel towards you. (b) Turn the computer on to its other side, and repeat the steps mentioned above to remove the second side base bezel.  (a) Ž Return the computer to its upright position. Push the two tabs on the front base bezel outwards, then pull the base bezel towards you. Replacing the Base Bezels Œ With the computer in its upright position, line- up the two tabs and the two small plastic Œ locaters with their respective locations. Gently insert the front base bezel until it clicks into place.  Lay the computer on to its side. Ž (a) Line up the four plastic guide tabs on the side base bezel with their respective locations. (b) Place your hands on each end of the side base bezel, then press it downwards until the four plastic guide tabs clear the guide ridge. Push the side base bezel forwards until it clicks into place. ™ Turn the computer on its other side, and repeat the steps mentioned in step Ž to install the second side base bezel. Ž Ž (b) Ž (a) 16 Ž Ž (b)