HP Kayak XU 04xx HP Kayak XU Series 04xx, Familiarization guide - Page 30
Complete the Questionnaire, The HP Kayak XU Series 0441 PC Workstation package is 8 cm
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Complete the Questionnaire to Check Your Understanding Complete the Questionnaire to Check Your Understanding Circle each letter that corresponds to a correct answer. (There may be more than one correct answer to each question). 1 Can a 512 MB registered ECC memory module be mixed with a unbuffered ECC SDRAM memory? a Yes, it can. However, the 512 MB module must be installed in Slot 1. b No, it cannot. Registered and unbuffered memory modules are not compatible. 2 Can a maximum of 1 GB of unbuffered ECC SDRAM memory modules be installed on a HP Kayak XU Series 0441 PC Workstation? a Yes, by installing 4 x 256 MB of unbuffered memory modules. b No. On the HP Kayak HP Kayak XU Series 0441 PC Workstation, there are only three DIMM sockets available, and only 128 MB memory modules can be used. 3 How can you distinguish the difference between the HP Kayak XU model Series 0441, and the previous HP Kayak XU models Series 0301 and Series 0303? a There is a reinforced processor cage for the Pentium II Xeon processor for Slot 1. b The HP Kayak XU Series 0441 PC Workstation package is 8 cm higher than the standard Kayak XU package. c Check the label on the side of the computer. 4 A single processor system has been upgraded to a dual processor system. Is it necessary to install a VRM in the vacant VRM slot? a No, it isn't. There is already two VRMs inserted in the VRM sockets 1 and 2 (from left to right). b Yes, it is. c No, it isn't. However, the two VRMs that are supplied with the second processor must be installed in the VRM sockets 1 and 2 (from left to right). 30
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-series-04xx-familiarization-guide-1e2f460/30.png)