HP Kayak XU 04xx HP Kayak XU Series 04xx, Familiarization guide - Page 13
Installing a, Single Processor, four self-retaining screw.
![]() |
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing a Single Processor Insert the processor into the BOOT PROC processor socket until it clicks into place. Do not install a processor for a single processor system in the DUAL PROC processor socket. Insert the VRMs into the VRM sockets 1 and 2 (from left to right). Replace the airflow guide and reconnect the fan to the system board. Replace the metal retaining plate that secures the processor(s) and tighten the four self-retaining screw. BOOT PROC Removing and Installing a Processor VRM 2 VRM 1 13
![](/manual_guide/products/hewlettpackard-kayak-xu-04xx-hp-kayak-xu-series-04xx-familiarization-guide-1e2f460/13.png)
13
Removing and Installing a Processor
³
Insert the processor into the BOOT
PROC
processor socket
until it clicks into
place. Do not
install a processor for a single
processor system in the DUAL PROC
processor socket.
Installing a
Single Processor
Replace the metal retaining plate that
secures the processor(s) and tighten the
four self-retaining screw.
±
Insert the VRMs into the VRM
sockets 1 and 2 (from left to right).
³
±
BOOT PROC
VRM 1
VRM 2
²
Replace the airflow guide and
reconnect the fan to the system board.
²