HP Kayak XU 04xx HP Kayak XU Series 04xx, Upgrade and Configuration Guide - Page 14
Installing Memory
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1 How to Install Accessories In Your HP PC Workstation Installing Memory Installing Memory Main Memory Modules If you need more main memory, you can install up to 2 GB of memory in four DIMM slots. For details of supported memory, refer to "Supported HP Accessories", on page 2. To install a main memory module: 1 Disconnect the computer's power cord and any LAN or telecommunications cables. 2 Remove the computer's cover (refer to page 3). 3 Remove the HP UltraFlow airflow guide (refer to page 5). 4 Remove the Ultra wide 16-bit SCSI cable from the system board. 5 Remove the floppy disk drive data cable from the system board. The location of the memory module slots (with retaining clips open) is shown here. Mem 4 Mem 1 6 English
1
How to Install Accessories In Your HP PC Workstation
Installing Memory
6
English
Installing Memory
Main Memory Modules
If you need more main memory, you can install up to 2 GB of memory in
four DIMM slots. For details of supported memory, refer to "Supported
HP Accessories", on page 2.
To install a main memory module:
1
Disconnect the computer’s power cord and any LAN or
telecommunications cables.
2
Remove the computer’s cover (refer to page 3).
3
Remove the HP UltraFlow airflow guide (refer to page 5).
4
Remove the Ultra wide 16-bit SCSI cable from the system board.
5
Remove the floppy disk drive data cable from the system board.
The location of the memory module slots (with retaining clips open) is
shown here.
Mem 1
Mem 4