HP Kayak XU 04xx HP Kayak XU Series 04xx, Upgrade and Configuration Guide - Page 15

reconnect all cables and power cords. Replace the cover refer

Get HP Kayak XU 04xx PDF manuals and user guides View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

1 How to Install Accessories In Your HP PC Workstation Installing Memory NOTE To ease installation, place your PC Workstation on its side with the system board facing upwards. 6 Insert the memory module into the slot at 90º to the system board (with the cutouts furthest from the processor). Insert the memory module into the slot at 90º to the system board Memory module cutouts Push the module until the retaining clips click into position. 7 Firmly press the memory module completely into the connector until the retaining clips click into position. 8 Repeat this procedure for each additional memory module you want to install. 9 Install any other accessories if necessary, then replace all units and reconnect all cables and power cords. Replace the cover (refer to page 4) and the airflow guide (refer to page 5). 10 Check the HP Summary Screen to verify the new configuration (for more information refer to "The HP Summary Screen and Setup Program" on page 60). English 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
English
7
1
How to Install Accessories In Your HP PC Workstation
Installing Memory
NOTE
To ease installation, place your PC Workstation on its side with the
system board facing upwards.
6
Insert the memory module into the slot at 90º to the system board
(with the cutouts furthest from the processor).
7
Firmly
press the memory module
completely
into the connector
until the retaining clips click into position.
8
Repeat this procedure for each additional memory module you want
to install.
9
Install any other accessories if necessary, then replace all units and
reconnect all cables and power cords. Replace the cover (refer
to page 4) and the airflow guide (refer to page 5).
10
Check the HP Summary Screen to verify the new configuration (for
more information refer to “The HP Summary Screen and Setup
Program” on page 60).
Push the module until the
retaining clips click into position.
Insert the memory module into the
slot at 90º to the system board
Memory module
cutouts