HP LH4r HP Netserver LXr 8500 Rack Cabling Guide - Page 19

2 Rack Cabling References Rack Configuration Tools Selected reference material derived from HP's rack configuration tools is published in this chapter for convenience including the following: • necessary and optional components • rack power subsystem configuration and placement • current and power requirements • discussion of component location in the rack • routing cables through the Cable Management Arm and Cable Guide • cooling requirements and air flow HP rack configuration tools are available on the worldwide web. Enter the following URL in your browser: www.hp.com/go/netserver At that Web site, search for "configuration tools". Look for Rack Configuration, Rack Assistant, and Order Assistant. You can read about the tools or download copies for installation. Tools can be used to plan a rack configuration for the components of your system. Power Cabling References and Guidelines Power Considerations for the HP NetServer LXr 8500 The HP NetServer LXr 8500 can be configured in either 208 or 230/240 VAC. Power supply (UPS) and distribution (PDU) components are available to support these configurations. A Redundant Switch is also available. Details of power considerations for the HP NetServer LXr 8500 include: ◊ the appropriate power cord for each server is shipped according to voltage requirements; refer to Table 2-2 for details ◊ available in 200/208 VAC configurations for the U. S. market 15