HP LH4r HP Netserver Service Handbook, Volume 3 - High-End - Page 40
PCI Hot Plug Slot LEDs
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
FAIL (Power Supply Failure) Communication Ports Lights solid yellow when power supply fails. Blinks yellow when power supply is drawing more current than it should, because of a short-circuit in the power supply or elsewhere in the server. If the short is in the power supply, the power supply shuts down. If the short is in the server, the server shuts down. PCI Hot Plug Slot LEDs Slots P7 through P10 on the I/O baseboard are 64-bit PCI slots that can be individually powered down through system software. These four PCI Hot Plug slots each have two LEDs. The LEDs are on the I/O baseboard, but you can see them through the server's rear panel. The green LED indicates whether power to the slot is on or off. The amber LED indicates whether the slot needs attention. Green LED On On Off Off Amber LED Off On On Off Indicates This Status Power to the slot is on, and the slot is operating normally. Do not remove the board from the slot. Power to the slot is on, but the slot needs attention. Do not remove the board from the slot. Power to the slot is off, and the slot needs attention. You can remove the board from this slot.. Power to the slot is off. You can remove the board from this slot. 34