HP LH4r HP Netserver Service Handbook, Volume 3 - High-End - Page 93
HP NetServer LXr Pro8
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
HP NetServer LXr Pro8 System Views Front Panel Controls Run DC Output AC Input Indicator Indicator Indicator Attention Indicator Message Display DC Power Switch Reset Switch Control DC Power Switch Reset Switch Run Indicator DC Output Indicator AC Input Indicator Attention Indicator Message Display Control Panel Switch and Indicator Definitions Description Turns the system on, or returns it to standby.. Press to perform a warm boot of the system. When lit green, indicates that the BIOS Power-On Self Test has passed, and that the system has started the boot process. When lit green, indicates that the DC voltages are on. It is connect to +5 volts. When lit green, indicates that the system is plugged into a live AC outlet. Normally off. When lit yellow, indicates that a component within the system has failed or has lost its configuration. Also flashes yellow when you use the Hardware Identification and Labeling Utility to locate this particular server in a multi-server rack installation. Displays information about system status and error conditions, including POST error messages and codes. (POST messages and codes also display on the system console.) In the case of fatal errors, error message displays here for one minute before system shuts down automatically. 87