HP LH4r HP Netserver Service Handbook, Volume 3 - High-End - Page 98

MB Memory Configuration Guidelines

Get HP LH4r - NetServer - 256 MB RAM PDF manuals and user guides View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

Mounting Tab Captive Screws Mounting Tab Memory There are four DIMM sockets on the system board for memory expansion. You can use 64 MB, 128 MB, and 256 MB Memory Configuration Guidelines The HP NetServer LXr Pro8 accepts up to two memory boards. Each board has 32 DIMM sockets and accepts only 128 MB SDRAM DIMMS, for a maximum capacity of 4096 MB per board. The minimum memory configuration is one memory board with two 128 MB SDRAM DIMMs. Use only 100 MHz HP 128 MB SDRAM DIMMs. • The minimum memory configuration is one memory board with two 128 MB SDRAM DIMMs. • The memory board DIMM slots are numbered from M0 to M31 as shown in Figure 1. • The recommended memory configurations and the slot numbers where SDRAM DIMMs are installed are listed in Figure 5-2 and Figure 5-3. Add SDRAM DIMMs only in these quantities and in the specified slot numbers. M0 M4 M8 M12 M16 M20 M24 M28 92

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
92
Mounting Tab
Mounting Tab
Captive
Screws
Memory
There are four DIMM sockets on the system board for memory expansion. You can use 64 MB, 128 MB, and
256 MB Memory Configuration Guidelines
The HP NetServer LXr Pro8 accepts up to two memory boards. Each board has 32 DIMM sockets and
accepts only 128 MB SDRAM DIMMS, for a maximum capacity of 4096 MB per board. The minimum
memory configuration is one memory board with two 128 MB SDRAM DIMMs. Use only 100 MHz HP 128
MB SDRAM DIMMs.
•
The minimum memory configuration is one memory board with two 128 MB SDRAM DIMMs.
•
The memory board DIMM slots are numbered from M0 to M31 as shown in Figure 1.
•
The recommended memory configurations and the slot numbers where SDRAM DIMMs are installed
are listed in Figure 5-2 and Figure 5-3. Add SDRAM DIMMs only in these quantities and in the
specified slot numbers.
M0
M4
M8
M12
M16
M20
M24
M28