HP LH4r HP Netserver Service Handbook, Volume 3 - High-End - Page 42
MB DIMMs in Banks A and B and eight
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
• For board-to-board interleaving, each memory board must hold the same number of DIMMs. If one board holds two types of DIMMs, the other board must also, and in the same banks. (For example, if one memory board holds eight 256 MB DIMMs in Banks A and B and eight 64MB DIMMs in Banks C and D, the other board must match this configuration exactly if card-to-card interleaving is to take place.) Primary Memory Board NOTE Keep both memory boards in the HP NetServer during operation, even if the secondary board has no DIMMs. The empty board acts as a terminator for the memory board slot. Secondary Memory Board 36
36
•
For board-to-board interleaving, each memory board must hold the same number of DIMMs
.
If
one board holds two types of DIMMs, the other board must also, and in the same banks.
(For
example, if one memory board holds eight
256 MB DIMMs in Banks A and B and eight
64MB
DIMMs in Banks C and D, the other board must match this configuration exactly if
card-to-card
interleaving is to take place.)
Primary
Memory
Board
Secondary
Memory
Board
NOTE
Keep both memory
boards in the HP
NetServer during
operation, even if the
secondary board has
no DIMMs.
The
empty board acts as
a terminator for the
memory board slot.