HP LH4r HP Ultra/Wide SCSI 4 GB and 9 GB Hard Disk Drive - Page 3

Contents 1 Prepare Drive for Installation 1 Introduction ...1 General Installation Steps 1 Step 1: Prepare for Installation 2 Tools You Need 2 Setup Information You Need 2 Unpack the Drive 3 Step 2: Determine the Drive Type 3 Step 3: Set the SCSI Address 8 Step 4: Connect SCSI Cable Adapter (if required 14 Step 5: Continue Installation 14 2 Mount the Drive in the NetServer L Series 15 Step 1: Mount the Drive in the System 15 Step 2: Connect the Drive Activity Light 16 Step 3: Connect the Drive 19 Step 4: Configure the Drive 20 3 Mount the Drive in the NetServer E 45 23 Step 1: Determine the Drive Location 23 Step 2: Mount the Drive in the System 25 Mount the Drive in Shelf 5 or 6 25 Mount the Drive in Shelf 3 or 4 26 Step 3: Connect the Drive 26 Step 4: Configure the Drive 27 A Jumper Settings 29 Jumper Legend 29 B Disk Drive Characteristics 31 NetWare and DOS 31 OS/2 and Windows NT 32 UNIX and Banyan Vines 33 C Returning HP Hard Disk Drives 35 D Warranty and Support 37 Hardware Warranty 37 iii