HP LH4r Installing Novell NetWare on an HP Netserver - Page 11

The installation program will proceed to copy NetWare files to your HP NetServer. Wait till next prompt. 21. Enter the Server Name and click Next. 22. Highlight the first Free Space and click Create. 23. Enter a volume name, select a volume type and click OK. 24. Repeat steps 22 through 23 until all free space is made into volumes. Then click Next. 25. Select to Mount all volumes when the server reboots by clicking Next. 26. Highlight the network board and specify the protocol. Once all Network boards have been assigned a protocol, click Next. NOTE: NetWare 5.1 requires at least one network card to have an IP address. 27. If you wish to configure the Domain Name Service, do so here. If not, click Next and OK to the warning. 28. Select your time zone and click Next. 29. Choose whether to create a New NDS Tree or use and Existing NDS Tree and click Next. 30. Enter the Tree name, the Context for Server Object, and the administrator password and click Next. 31. Review NDS and click Next. 32. Insert NetWare License diskette into the floppy drive and click the directory tree icon next to the License Location field. Select the NLF file displayed and click OK. The license information will be displayed under Description. Verify and click Next. 33. If you wish to install other items or products, do so here by selecting Custom and clicking Next. If not, click Next. 34. Accept the default Novell Certificate Server 2.0 Objects by clicking Next, then clicking OK to the Organizational CA Warning. NOTE: Depending on the options you chose, you may receive additional prompts. Enter the required information and click Next. 35. Review Summary and click Finish. 36. Refer to the Novell NetWare installation procedures for all other installation issues. After completing the installation of NetWare, you must install the latest support pack from Novell. This can be downloaded from: