HP LH4r Installing Novell NetWare on an HP Netserver - Page 9
NetWare 5.1 or NetWare Small Business Suite 5/5.1 Installation
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
documentation. NetWare 5.1 or NetWare Small Business Suite 5/5.1 Installation Install NetWare 5.1 or NetWare Small Business Suite 5/5.1 according to the instructions below. You may skip the steps that don't apply to the version of NetWare you are installing. NOTE: The NetWare installation program auto-detect feature attempts to match hardware with the appropriate drivers. To run HP NetRAID-1Si or HP NetRAID-3Si adapters in I2O mode, you will need to do it after the initial installation of NetWare 5.1. See the section Completing the Installation of the HP NetRAID-1Si/HP NetRAID-3Si I2O driver on NetWare 5.1/Small Business Suite 5/5.1. NOTE: At least a 250 MB DOS partition must already exist on your hard drive and your CD-ROM drive should be accessible. For detailed instructions, refer back to the section Installing the CD-ROM Drive in DOS with FDATACD.SYS and MSCDEX.EXE. 1. Remove the HP NetServer Navigator CD-ROM and any floppy diskettes from the A: drive and boot your server into DOS. 2. Create a directory named NWUPDATE. 3. Copy all drivers from the NOS Drivers disk to the NWUPDATE directory. 4. Remove the NOS Drivers disk from drive A: and reboot your HP NetServer using the NetWare CD-ROM, the NetWare 5.1 installation will automatically begin. For NetWare 5.1 5. After reading the License Agreement, highlight Accept License Agreement and press Enter. 6. Highlight Continue with Existing Partition and press Enter. For Small Business Suite 5/5.1 7. When prompted to Create or keep a DOS Partition select Continue with existing partition and click Next. 8. Click Yes to any warnings and Next to reboot and continue installation. 9. When prompted , select Standard or Advanced installation and click Next. (Instructions use advanced.) 10. If prompted, Insert NetWare Small Business Suite 5/5.1 License diskette and press Enter, then F10 to Accept License Agreement. For both NetWare 5.1 and Small Business Suite 5/5.1 11. Select Upgrade or New server, then highlight Continue and press Enter. (Instructions use New Server.)