HP LH6000r HP Netserver Fibre Channel HBA Guide - Page 17
PWR / ACT LED is
![]() |
View all HP LH6000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Upon Power-up: • PWR / ACT LED is ON • LINK LED is OFF During Card initialization by the Host OS: • PWR / ACT LED will flash as Fibre Channel devices are identified • LINK LED is OFF Once the card has been initialized by the Host OS: • PWR / ACT LED will flash at approximately 1 second intervals • LINK LED is on if the link is up Figure 2-7. Adapter LEDs 11
![](/manual_guide/products/hewlettpackard-lh3000r-hp-netserver-fibre-channel-hba-guide-4cf6a8b/17.png)
11
Upon Power-up:
•
PWR / ACT LED is ON
•
LINK LED is OFF
During Card initialization by the Host OS:
•
PWR / ACT LED will flash as Fibre Channel devices are identified
•
LINK LED is OFF
Once the card has been initialized by the Host OS:
•
PWR / ACT LED will flash at approximately 1 second intervals
•
LINK LED is on if the link is up
Figure 2-7. Adapter LEDs