HP LH6000r HP Netserver Fibre Channel HBA Guide - Page 25
Unloading the Driver, Updating the Driver
![]() |
View all HP LH6000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Unloading the Driver For removing or updating the driver, perform the following steps: NOTE The old driver must be removed before installing the new one. 1. Confirm that there is no Fibre Channel activity occurring by dismounting the drive. 2. Switch to the Command Console 3. To dismount the drive, Type: Dismount volume_name NOTE The volume_name is the volume that the user has created. If more than one volume needs to be dismounted, perform the dismount command for each individual volume. 4. To remove the driver, Type: Unload AFCNW.HAM When the driver is successfully removed, an acknowledgement from the system displays the message: driver unloaded The controller card is now deactivated. Updating the Driver To update the driver, first perform the unload procedure, then the load procedure detailed above. 19
![](/manual_guide/products/hewlettpackard-lh3000r-hp-netserver-fibre-channel-hba-guide-4cf6a8b/25.png)