HP LaserJet M5000 LaserJet MFP - Imaging and Printing Security Best Practices - Page 66
IP Address, Check ACL for HTTP access, Clear all ACL, Table entries
![]() |
View all HP LaserJet M5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Figure 57: The Configuration Categories Menu Network option. 2. Add an IP address or a net mask by filling in the IP Address or Mask fields. CAUTION: Be sure to include the IP address of the computer that is running Web Jetadmin (it can be a computer other than the one you are using). Otherwise, the ACL will block your access, and you will not be able to continue. The Mask option requires an entry in the IP address field to determine the subnet for which to grant access. If you set a mask be sure it is correct before moving on. 3. To make sure all of the MFPs are configured with your new listings, click Clear all ACL Table entries the first time you add a listing. Note: To find out which IPs are configured in the ACL of a single MFP, open the device in Web Jetadmin and navigate to the ACL options (all of the MFPs should be the same if you are configuring them all at once). It will list the IP addresses or subnets that are already configured. 4. Check the checkbox for Check ACL for HTTP access to ensure that the ACL restricts access to the MFP EWS through HTTP. Note: These ACL options allow you to add one IP address or one mask at a time. To add more IPs or masks, repeat these steps. Remember to deselect Allow Web Server (HTTP) access each time. Chapter 4 HP LaserJet and Color LaserJet MFP Security Checklist 62
![](/manual_guide/products/hewlettpackard-laserjet-cm3000-laserjet-mfp-imaging-printing-security-best-practices-7a3c7a2/66.png)