HP LaserJet P3000 HP LaserJet P3005 - Software Technical Reference - Page 176

Job Storage tab features To gain access to the Job Storage tab, follow these steps: 1. Click Start. 2. Select Settings. 3. Click Printers. 4. Right-click the device name. 5. Click Properties. 6. Click the Job Storage tab. NOTE The Job Storage tab appears only when at least 80 MB of total memory is installed and configured or an optional hard disk is installed. Use the job-storage features to store print jobs in the HP LaserJet P3005 printer memory for printing at a later time. These job-storage features are described in the following sections. The Job Storage tab appears among the driver tabs only if the job-storage feature is enabled. To support job-storage features for complex jobs, or if you often print complex graphics, print postscript (.PS) documents, or use many downloaded fonts, HP recommends that you install additional memory. Added memory also gives you more flexibility in supporting job-storage features. A minimum total memory of 80 MB is required to use the job-storage features. After additional memory is installed, the driver must be configured to reflect the changes in the device. If bidirectional communication is enabled in your environment, the Update Now feature can be used to update the drivers. To configure the drivers manually after installing additional memory, follow these steps: 1. Click Start. 2. Select Settings. 3. Click Printers. 4. Right-click the device name. 5. Click Properties. 6. Click the Configure tab. 7. Under Other Options, click More.... 8. If additional memory has been installed, change the setting in the Total Memory: drop-down menu. If you select at least 80 MB of total installed memory, this also selects the Job Storage Enabled check box. 9. Click OK to make the job-storage features available. To disable the job-storage feature, follow these steps: 1. Click Start. 2. Select Settings. 152 Chapter 4 HP traditional print drivers for MS Windows ENWW