HP LaserJet Pro MFP M426-M427 User Guide - Page 109
Device Configuration, Job Storage Setup
View all HP LaserJet Pro MFP M426-M427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Tab or section Description Home tab Provides printer, status, and configuration information. ● Device Status: Shows the printer status and shows the approximate percent life remaining of HP supplies. ● Supplies Status: Shows the approximate percent life remaining of HP supplies. Actual supply life remaining can vary. Consider having a replacement supply available to install when print quality is no longer acceptable. The supply does not need to be replaced unless the print quality is no longer acceptable. ● Device Configuration: Shows the information found on the printer configuration page. ● Network Summary: Shows the information found on the printer network configuration page. ● Reports: Print the configuration and supplies status pages that the printer generates. ● Job Storage Log: Shows a summary of all jobs stored in the printer memory. ● Color Usage Log: Shows a summary of color jobs that the printer has produced. System tab Provides the ability to configure the printer from your computer. (Color printers only) ● Event Log: Shows a list of all printer events and errors. ● Device Information: Provides basic printer and company information. ● Paper Setup: Change the default paper-handling settings for the printer. ● Print Quality: Change the default print-quality settings for the printer. ● Energy Settings: Change the default times for entering Sleep/Auto Off mode or automatic shut down. ● Job Storage Setup: Configure the job storage settings for the printer. ● Print Density: Change the print density of contrasts, highlights, midtones, and shadows ● Paper Types: Configure print modes that correspond to the paper types that the printer accepts. ● System Setup: Change the system defaults for the printer. ● Supply Settings: Change the settings for Cartridge is low alerts and other supplies information. ● Service: Perform the cleaning procedure on the printer. ● Save and Restore: Save the current settings for the printer to a file on the computer. Use this file to load the same settings onto another printer or to restore these settings to this printer at a later time. ● Administration: Set or change the printer password. Enable or disable printer features. Print tab Provides the ability to change default print settings from your computer. NOTE: The System tab can be password-protected. If this printer is on a network, always consult with the administrator before changing settings on this tab. ● Printing: Change the default printer print settings, such as number of copies and paper orientation. These are the same options that are available on the control panel. ● PCL5c: View and change the PCL5c settings. ● PostScript: Turn off or on the Print PS Errors feature. ENWW Advanced configuration with HP Embedded Web Server (EWS) and HP Device Toolbox (Windows) 97