HP Latex 1500 Site Preparation Guide - Page 18
Floor surface, Lighting, Designing the print production area, Safety installations
View all HP Latex 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
In the table below, the number or letter in the left column corresponds to the diagram above. A 5.7 m (224.4 in) B 3.73 m (146.8 in) C 1.12 m (44.1 in) D 1.37 m (53.9 in) E 0.25 m (9.8 in) F 0.60 m (23.6 in) Floor surface The floor surface should have the following characteristics: ● Horizontal surface ● Solid, smooth, and level ● No holes or indentations ● Static-free surface (no carpet) ● Easy to clean ● Durable ● Free from strong vibrations ● Concrete Lighting Whenever your printer is in operation, the print production area should be well lit to provide the operator with optimal conditions for checking the color and alignment during print production. If there is not enough natural light, artificial lighting will be required. Designing the print production area Safety installations Fire fighting equipment You must provide two fire extinguishers for the site. Make sure the extinguishers are placed where they are easily accessible in case of fire. 14 Chapter 2 Site preparation ENWW