HP Latex 1500 Site Preparation Guide - Page 25
Tools and manpower required for installation, Moving equipment, Ground floor installation
View all HP Latex 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Crate (printer inside) Printer Width 5.86 m (231 in) 5.72 m (225.2 in) Depth 1.81 m (71.3 in) 1.37 m (53.9 in) Height Weight 1.91 m (75.2 in) 2000 kg (4409 lb) 1,67 m/1,53 m, no beacon (66 in/60.2 in, no beacon) 1200 kg (2645.5 lb) Tools and manpower required for installation The installation process requires 4 capable people in case ramps are used. In case a forklift is used, only 2 people are needed, usually the installer and the operator. Additionally a certified electrician is required to configure the electrical system. Check with the installation specialist before delivery to make sure you do not have to supply any tools. Moving equipment Ground floor installation It is highly recommended to lower the printer with the ramps as indicated in the installation guide. In exceptional cases, where ramps cannot be used due to a physical barrier, follow the alternative instructions indicated carefully. CAUTION: Unloading and moving the printer and all system components is the customer's responsibility and not HP's. Failure to provide the required moving and lifting apparatus could result in personal injury or damage the printer during installation. Lower the printer with ramps ● Minimum room space to lower 4,5 m beside the crate, 6,4 m total ● Minimum manpower: 4 people ● Flat floor or max 3% inclination In case any specification cannot be met, use a forklift to lower the printer. Please follow the instructions carefully: ● The forklift can be ordered as a service kit (K4T88-67290), and is also attached to the reseller Kit. The use of specialist moving and lifting equipment is required during the unloading, unpacking and installation of your printer. Advanced booking for the services of a machinery moving contractor/rigger must be made. It is important to confirm that the hired moving specialist and moving equipment will be available when the printer is delivered. The following equipment is recommended: ● Wide, heavy-duty forklift (required) Forklift specifications Forklift Weight 6000 kg (13228 lb) Minimum fork length 2 m (79 in) for crated printer 1.5 m (59 in) for printer only Inner distance between forks 1.3 m (51 in) ENWW Tools and manpower required for installation 21