HP Latex 2700 User Guide 4 - Page 5

2 Substrate configurations The substrate can be loaded in a variety of different configurations to suit your different needs. Before loading substrate, go to the Internal Print Server and select Substrate load/unload, then select the configuration you intend to use. With the roll-to-freefall kit installed, you can work with the roll-to-freefall configuration. The roll-to-freefall configuration is suitable when you want to cut and remove one or more prints as soon as they come out of the printer. The substrate is kept under tension between the input roll and the tension roller, but it can be cut after the tension roller, because then it is no longer under tension. Load a roll (roll-to-freefall configuration) The substrate roll is mounted on the input spindle; the printed substrate will be deposited on the floor in front of the printer. NOTE: This video applies to HP Latex 800, HP Latex 1500, HP Latex 2700 series, and HP Latex 3000 series printers. The substrate goes from the input spindle over the main roller, over the platen, over the front diverters, and then to the tension roller, after which it continues to the floor. 2 Chapter 2 Substrate configurations