HP Latex 800 Site Preparation Guide

HP Latex 800 Manual

Get HP Latex 800 PDF manuals and user guides View all HP Latex 800 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Latex 800 manual content summary:

  • HP Latex 800 | Site Preparation Guide - Page 1
    HP Latex 700 Printer Series HP Latex 800 Printer Series Site Preparation Guide SUMMARY You are responsible for preparing the physical site for the installation of the printer.
  • HP Latex 800 | Site Preparation Guide - Page 2
  • HP Latex 800 | Site Preparation Guide - Page 3
    Table of contents 1 Overview...1 Documentation...1 Customer responsibility ...1 Installation time schedule...1 2 Site preparation requirements...3 Physical space requirements...3 Designing the optimal print production area...6 RIP workstation characteristics...7 Networking ...7 Printing supplies...8
  • HP Latex 800 | Site Preparation Guide - Page 4
    iv
  • HP Latex 800 | Site Preparation Guide - Page 5
    with your printer, and can also be downloaded. Manuals can be downloaded from: http://www.hp.com/go/latex700-800series/manuals. ● Introductory information ● Limited warranty ● Legal information ● Site preparation guide (this guide) ● Assembly instructions ● User guide Customer responsibility
  • HP Latex 800 | Site Preparation Guide - Page 6
    2 Chapter 1 Overview
  • HP Latex 800 | Site Preparation Guide - Page 7
    IMPORTANT: For the 700 printer series, 5 people are needed to rotate the printer. Physical space requirements up) 2583 mm (101.7 in) 800 (curing module down) 2583 mm (101.7 in) 800 (curing module up) 2583 mm (101.7 in) 800 (with beacon) 2583 mm (101.7 in) 800 W (curing module down) 2583
  • HP Latex 800 | Site Preparation Guide - Page 8
    the following diagrams: Figure 2-1 700 series Figure 2-2 800 series Environmental specifications These environmental conditions must be kept within the specified ranges to ensure the correct operation of the printer. Failure to do so may cause print-quality problems or damage sensitive electronic
  • HP Latex 800 | Site Preparation Guide - Page 9
    provide a minimum of 5 ACH (air changes per hour) of fresh air ventilation and a minimum room volume of 60 m³. These specifications are valid for one HP printer using a black area-fill print at 4 passes and 100% ink density, assuming 8 h printing time per day. If there is other equipment in the room
  • HP Latex 800 | Site Preparation Guide - Page 10
    that you have enough space to perform the following tasks: ● Print ● Replace a substrate roll ● Service the printer or replace printer components ● Ensure the printer is well ventilated Table 2-4 Space required for printer Width 2100 mm (82.7 in) Length 2793 mm (110.0 in) 6 Chapter 2 Site
  • HP Latex 800 | Site Preparation Guide - Page 11
    complete the following tasks: NOTE: In order to perform remote support, the printer must have access to the Internet using the LAN connection. your IT provider on how to configure Internet access. If you can connect to hp.com, you can check the browser settings for proxy configuration as follows: ●
  • HP Latex 800 | Site Preparation Guide - Page 12
    or Internet Service Provider. If in doubt, you probably do not need a Web proxy. Printing supplies Some printing is done during the printer installation These are the printer's power-supply requirements. Table 2-5 Power specifications HP Latex 700 series HP Latex 800 series Number of power
  • HP Latex 800 | Site Preparation Guide - Page 13
    current (per power cord) Printing power consumption * Power consumption in ready mode HP Latex 700 series Printer: 13 A Curing: 9 A 1.5 - 2.6 kW (3.6 kW peak) 95 W 50 / 60 Hz HP Latex 800 series Printer: 16 A Curing: 16 A 1.8 - 2.8 kW (5.0 kW peak) 105 W * Final printing power consumption may
  • HP Latex 800 | Site Preparation Guide - Page 14
    plug type used in the country of installation. The Table 2-7 Power cord specifications for the HP Latex 700 Printer series on page 11 list examples of the power cords and the plugs provided with the printer according to the country. To make sure you have the right wall receptacle, find your country
  • HP Latex 800 | Site Preparation Guide - Page 15
    Table 2-7 Power cord specifications for the HP Latex 700 Printer series Country HP part number Length Plug type Plug EU, Russia, Korea, 8120-6352 Indonesia 2.5 m CEE 7-VII Rated current 16 A Voltage 250 V Denmark 8121-1077 2.5 m DK 2-5 A 13 A 250 V
  • HP Latex 800 | Site Preparation Guide - Page 16
    m GB2099, GB 1002 (16 A) 8121-1033 2.5 m CNS 690 Type 2(4) 16 A 250 V 15 A 250 V Table 2-8 Power cord specifications for the HP Latex 800 Printer series Country HP part number Length Plug type Plug US, Canada, Mexico, Japan, Philippines, Thailand 8120-6360 2.5 m NEMA 6-20P, 240 V, 20
  • HP Latex 800 | Site Preparation Guide - Page 17
    cord specifications for the HP Latex 800 Printer series (continued) Country HP part number Length Plug type Plug Singapore, Hong Kong 8120-6360 4.5 m NEMA 6-20P, 240 V, 20 A (nonlocking) Rated current 20 A Voltage 250 V Table 2-9 Appliance coupler (printer connection) Country Appliance
  • HP Latex 800 | Site Preparation Guide - Page 18
    The following grounding tasks must be fulfilled to meet the site preparation requirements: ● Grounding wires must be insulated and at least equal in size to the phase conductors. ● Ground impedance must be less than 0.5 Ω or comply with the Electrical Code requirements of the local jurisdiction of
  • HP Latex 800 | Site Preparation Guide - Page 19
    electrician aware of all requirements and specifications highlighted in this guide? (Required) Is the single-phase line voltage inside cord plug type provided by HP? (Required) Are the wall receptacles (wall sockets) and electrical installation suitable for the printer's rated current ? NOTE:
  • HP Latex 800 | Site Preparation Guide - Page 20
    for installation? Have network connections been supplied as per spec? Do you need a web proxy? If so, a LAN cable long enough to connect the printer to the network? Comments Table 3-5 Environmental requirements requirements specified in the site preparation guide? (Required) Comments Table 3-6
  • HP Latex 800 | Site Preparation Guide - Page 21
    Table 3-7 Customer information (continued) Please enter the requested information Site preparation checklist 17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
HP Latex 700 Printer Series
HP Latex 800 Printer Series
Site Preparation Guide
SUMMARY
You are responsible for preparing the physical site for the installation of the printer.