HP Latex 800 Site Preparation Guide - Page 8

Table 2-2 Physical specifications without packaging (continued) Printer model Length Width 800 W (curing module up) 2583 mm (101.7 in) 776 mm (30.6 in) 800 W (with beacon) 2583 mm (101.7 in) 866 mm (34.1 in) Height 1869 mm (73.6 in) 1677 mm (66.0 in) Weight 300 kg (661 lb) 300 kg (661 lb) Doorways without packaging: minimum width 1.01 m (40 in) × minimum height 1.67 m (66 in) required. IMPORTANT: Maximum ramp slope 12°. The space required for assembly is 1.5 m (5 ft) front and rear, 7.7 m (25 ft 4 in) at the side, and 2.4 m (7 ft 11 in) in height. The space required is illustrated in the following diagrams: Figure 2-1 700 series Figure 2-2 800 series Environmental specifications These environmental conditions must be kept within the specified ranges to ensure the correct operation of the printer. Failure to do so may cause print-quality problems or damage sensitive electronic components. Table 2-3 Environmental specifications Relative humidity range for best print quality 40-60%, depending on substrate type Relative humidity range for printing 20-80%, depending on substrate type Temperature range for best print quality 20 to 25°C (68 to 77°F), depending on substrate type Temperature range for printing 15 to 30°C (59 to 86°F), depending on substrate type Temperature range when not in operation −15 to +55°C (+5 to +131°F) 4 Chapter 2 Site preparation requirements