HP Latex 800 Site Preparation Guide - Page 13
Circuit breakers, These are the printer's circuit-breaker requirements.
![]() |
View all HP Latex 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 2-5 Power specifications (continued) Input frequency Maximum load current (per power cord) Printing power consumption * Power consumption in ready mode HP Latex 700 series Printer: 13 A Curing: 9 A 1.5 - 2.6 kW (3.6 kW peak) 95 W 50 / 60 Hz HP Latex 800 series Printer: 16 A Curing: 16 A 1.8 - 2.8 kW (5.0 kW peak) 105 W * Final printing power consumption may be affected by room and printing temperature, input voltage, and other factors. Circuit breakers These are the printer's circuit-breaker requirements. NOTE: The circuit breakers must meet the requirements of the printer and should be in accordance with the Electrical Code requirements of the local jurisdiction of the country where the equipment is installed. Table 2-6 Dedicated lines per SKU Characteristic Dedicated line Branch circuit breaker Residual current circuit breaker, also known as Ground Fault Circuit Interrupter (GFCI) Specification HP Latex 800 series: Required. See Single-phase power on page 8. HP Latex 700 series: Not required. Do not overload lines. See Single-phase power on page 8. 2 poles, 16 or 20 A according to local laws and printer maximum load current Required. 2 poles, 30 mA residual, at least 20 A capacity. Circuit breakers 9
![](/manual_guide/products/hewlettpackard-latex-700-site-preparation-guide-3f9fd1b/13.png)