HP MSA2312sa HP StorageWorks 2000 G2 Modular Smart Array reference guide (5009 - Page 100
an invalid license., An attempt to write license data failed due
View all HP MSA2312sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Table 14 Event code descriptions and recommended actions (continued) Event Event type Description code Recommended action 230 Warning The snap pool has reached the snap pool error threshold. The system will take the action set up in the policy. Default is to delete the oldest snapshot. You can expand the snap pool or delete snapshots. 231 Critical The snap pool has reached the snap pool critical threshold. The system will take the action set up in the policy. Default is to delete all snapshots on the snap pool. If the policy is to halt writes, then you must free up space on the snap pool master, or convert the master volume to a standard volume in order to resume operations. 232 Warning The maximum number of enclosures allowed for the current configuration has been exceeded. The platform does not support the number of enclosures that are configured. The firmware has removed the enclosure indicated by this event from its configuration. 233 Warning The specified disk type is invalid and not allowed in the current configuration. One or more disks are not allowed for this platform. They have been removed from the configuration. Replace the disallowed disks with ones that are supported. 234 Critical The specified snap pool is unrecoverable and can therefore no longer be used. All the snapshots associated with this snap pool are invalid and the user may want to delete them. However, the data on the master volume can be recovered by converting it to a standard volume. 235 Informational A non-disk SCSI device, such as an EMP or partner controller, has reported a check condition. 236 Informational A special shutdown operation has started. 237 Informational A firmware update has started and is in progress. 238 Warning An attempt to write license data failed due to an invalid license. Check the license for what is allowed for the platform, make corrections as appropriate, and reinstall. If the license is invalid, the write will fail. 239 Warning A timeout has occurred while flushing the CompactFlash. Cycle power and restart the system. If the error persists, save the log files and contact a service technician. 240 Warning A failure has occurred while flushing the CompactFlash. Cycle power and restart the system. If the error persists, save the log files and contact a service technician. 241- 242 Informational CompactFlash status events generated by the auto-write-through feature whenever an environmental change occurs. If an auto-write-through-trigger condition has been met, write-back cache is disabled. 243 Informational A new RAID enclosure has been detected. This happens when a controller FRU is moved from one enclosure to another and the enclosure detects that the midplane WWN is different from the WWN it has in its local flash. 100 Event code reference