HP Mini 1104 HP Mini 1104 - Maintenance and Service Guide - Page 51
from the system board., Remove the keyboard
View all HP Mini 1104 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
7. Lift the rear edge of the keyboard (1), and then swing the keyboard (2) up and forward until it rests upside down on the palm rest. 8. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then disconnect the keyboard cable (2) from the system board. 9. Remove the keyboard (3). Reverse this procedure to install the keyboard. Component replacement procedures 43
7.
Lift the rear edge of the keyboard
(1)
, and then swing the keyboard
(2)
up and forward until it
rests upside down on the palm rest.
8.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached, and
then disconnect the keyboard cable
(2)
from the system board.
9.
Remove the keyboard
(3)
.
Reverse this procedure to install the keyboard.
Component replacement procedures
43