HP Mini 1104 HP Mini 1104 - Maintenance and Service Guide - Page 65
Display assembly, Service cover see
View all HP Mini 1104 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Reverse this procedure to install the heat sink. Display assembly Description Spare part number Display assembly, 10.1-in, LED, WSVGA, AntiGlare (includes display panel cable, 2 WLAN antenna transceivers and cables, and webcamera/microphone module and cable): For use only on computer models equipped with WWAN capability (includes WWAN antenna cables and transceivers) 665226-001 For use only on computer models not equipped with WWAN capability 665225-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30), and then remove the following components: ● Service cover (see WLAN module on page 32) ● Keyboard (see Keyboard on page 41) ● Top cover (see Top cover on page 44) Component replacement procedures 57