HP Mini 1104 HP Mini 1104 - Maintenance and Service Guide - Page 66

Remove the display assembly, Flex the inside edges of the top edge

Get HP Mini 1104 PDF manuals and user guides View all HP Mini 1104 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Remove the display assembly: 1. Position the computer upside down, with the front toward you. CAUTION: Support the open display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 2. Remove the two Phillips PM2.0×5.7 screws (1) that secure the display assembly to the computer. 3. Remove the display assembly (2). 4. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. 58 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
Remove the display assembly:
1.
Position the computer upside down, with the front toward you.
CAUTION:
Support the open display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
2.
Remove the two Phillips PM2.0×5.7 screws
(1)
that secure the display assembly to the computer.
3.
Remove the display assembly
(2)
.
4.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the
bottom edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
58
Chapter 4
Removal and replacement procedures