HP Mini 210-2000 HP Mini 210 - Maintenance and Service Guide - Page 59
Remove the 8 Phillips 2.0x4.0 screws that secure the top cover to the base enclosure.
View all HP Mini 210-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
10. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable (3) from the system board. 11. Remove the 8 Phillips 2.0x4.0 screws that secure the top cover to the base enclosure. Component replacement procedures 51
10.
Release the ZIF connector
(2)
to which the TouchPad cable is connected, and then disconnect
the TouchPad cable
(3)
from the system board.
11.
Remove the 8 Phillips 2.0x4.0 screws that secure the top cover to the base enclosure.
Component replacement procedures
51