HP Mini 210-2000 HP Mini 210 - Maintenance and Service Guide - Page 65
CAUTION, Remove the 2 Phillips 2.5×5.0 screws
View all HP Mini 210-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
7. Release the wireless antenna cables (2) from the clip built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other device components. 8. Remove the 2 Phillips 2.5×5.0 screws (1) that secure the display assembly to the base enclosure. 9. Remove the display assembly (2). Component replacement procedures 57
7.
Release the wireless antenna cables
(2)
from the clip built into the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other device
components.
8.
Remove the 2 Phillips 2.5×5.0 screws
(1)
that secure the display assembly to the base
enclosure.
9.
Remove the display assembly
(2)
.
Component replacement procedures
57