HP Mini 210-2000 HP Mini 210 - Maintenance and Service Guide - Page 73
RJ-45 cover, Top cover see
View all HP Mini 210-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Reverse this procedure to install the power connector cable. RJ-45 cover Description RJ-45 cover Spare part number 626580-001 Before removing the RJ45 cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 31). b. Service access cover (see Service access cover on page 34). c. Hard drive (see Hard drive on page 37). d. Keyboard (see Keyboard on page 46). e. Top cover (see Top cover on page 49). f. Display assembly (see Display assembly on page 55). g. System board (see System board on page 61). Remove the RJ-45 cover: Remove the RJ-45 cover by grasping the cover and pulling it away from the base enclosure. Reverse this procedure to install the RJ-45 cover. Component replacement procedures 65