HP OMEN X 2S Maintenance and Service Guide - Page 40
Memory module, procedure to remove both memory modules.
View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Memory module Table 5-3 Memory module descriptions and part numbers Description Memory module, 16 GB (PC4-2666) Memory module, 8 GB (PC4-2666) Memory module, 16 GB (PC4-3200) Spare part number 937438-850 937236-850 L62310-001 Before removing the memory modules, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the bottom cover (see Bottom cover on page 27). 3. Disconnect the battery (see Battery and speakers on page 32). Remove the memory modules: 1. Spread the two retention clips outward (1) until the memory module tilts up at a 45-degree angle. NOTE: Do not completely remove the protective sheet from the primary memory module. 2. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same procedure to remove both memory modules. IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. Reverse this procedure to install memory modules. 30 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts