HP OMEN X 2S Maintenance and Service Guide - Page 41
Removal and replacement procedures for authorized service provider parts, Component replacement
View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6 Removal and replacement procedures for authorized service provider parts IMPORTANT: Components described in this chapter should be accessed only by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures There are as many as 52 screws that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Thermal material Table 6-1 Thermal material description and part number Description Liquid metal thermal material Spare part number L65923-001 Thermal material must be applied on site, and therefore is not included in component spare part kits. When removing any part that also requires removal of the heat sink, be sure to order and apply thermal material. Affected parts are shown in the following list: ● Power button board cable ● Touchpad cable ● Heat sink ● IR sensor board ● IR sensor board cable ● Second display panel ● System board ● Top cover with keyboard Component replacement procedures 31