HP OMEN X 2S Maintenance and Service Guide - Page 52
Phillips M2.0 × 5.5 screws, connector on the keyboard
View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. Remove the five Phillips M2.0 × 5.5 screws (1) that secure the system board to the computer. 3. Lift the left side of the system board (2). 4. Rotate the system board upside down (1), and then disconnect the keyboard cable from the ZIF connector on the keyboard (2). 42 Chapter 6 Removal and replacement procedures for authorized service provider parts
2.
Remove the
five
Phillips M2.0 × 5.5 screws
(1)
that secure the system board to the computer.
3.
Lift the left side of the system board
(2)
.
4.
Rotate the system board upside down
(1)
, and then disconnect the keyboard cable from the ZIF
connector on the keyboard
(2)
.
42
Chapter 6
Removal and replacement procedures for authorized service provider parts