HP OMEN X 2S Maintenance and Service Guide - Page 50
Power button board, Remove the power button board
View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Power button board NOTE: The power button board spare part kit does not include the cable. The cable is available as spare part number L57012-001. NOTE: Liquid metal thermal grease is available as spare part number L65923-001. Table 6-6 Power button board descriptions and part numbers Description Spare part number Power button board L57020-001 Before removing the power button board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the bottom cover (see Bottom cover on page 27). 3. Disconnect the battery (see Battery and speakers on page 32). 4. Remove the fan/heat sink assembly (see Heat sink/fan assembly on page 35). Remove the power button board: 1. Disconnect the cable from the ZIF connector on the power button board (1). 2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the board to the computer. 3. Remove the board from the computer (3). Reverse this procedure to install the power button board. 40 Chapter 6 Removal and replacement procedures for authorized service provider parts