HP OMEN X 2S Maintenance and Service Guide - Page 51
System board, Display cable ZIF
View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
System board NOTE: Liquid metal thermal grease is available as spare part number L65923-001. Table 6-7 System board descriptions and part numbers Intel Core i9-9880H processor and 8 GB of discrete graphics memory (GeForce GTX 2080) Intel Core i9-9880H processor and 8 GB of discrete graphics memory (GeForce GTX 2070) Intel Core i7-9750H processor and 8 GB of discrete graphics memory (GeForce GTX 2080) Intel Core i7-9750H processor and 8 GB of discrete graphics memory (GeForce GTX 2070) L57039-xx1 L57037-xx1 L57038-xx1 L57036-xx1 Before removing the system board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the bottom cover (see Bottom cover on page 27). 3. Remove the battery and speakers (see Battery and speakers on page 32). 4. Remove the solid-state drive (see Solid-state drive and Optane Memory Module on page 29). 5. Remove the heat sink/fan assembly (see Heat sink/fan assembly on page 35). 6. Remove the second display transfer board (see Second display transfer board on page 38). 7. Remove the power connector board and bracket (see Power connector cable on page 39). Remove the system board: 1. Disconnect the following cables from the system board: (1) WLAN antennas (2) IR camera board cable (ZIF) (3) Display cable (ZIF) (4) Power button board cable from power button board Component replacement procedures 41