HP OMEN X 2S Maintenance and Service Guide - Page 55

Thermal shield (CU plate), Remove the Phillips M2.0 × 2.5 screw

Get HP OMEN X 2S PDF manuals and user guides View all HP OMEN X 2S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Thermal shield (CU plate) Table 6-9 Thermal shield description and part number Description Thermal shield Spare part number not spared Before removing the thermal shield, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 26). 2. Remove the bottom cover (see Bottom cover on page 27). 3. Remove the battery and speakers (see Battery and speakers on page 32). 4. Remove the solid-state drive (see Solid-state drive and Optane Memory Module on page 29). 5. Remove the heat sink/fan assembly (see Heat sink/fan assembly on page 35). 6. Remove the second display transfer board (see Second display transfer board on page 38). 7. Remove the power connector board and bracket (see Power connector cable on page 39). 8. Remove the system board (see System board on page 41). Remove the thermal shield: 1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the shield to the computer. 2. Remove the thermal shield from the computer (2) while pulling the antenna cable through the hole in the shield (3). Reverse this procedure to install the thermal shield. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Thermal shield (CU plate)
Table 6-9
Thermal shield description and part number
Description
Spare part number
Thermal shield
not spared
Before removing the thermal shield, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
26
).
2.
Remove the bottom cover (see
Bottom cover
on page
27
).
3.
Remove the battery and speakers (see
Battery and speakers
on page
32
).
4.
Remove the solid-state drive (see
Solid-state drive and Optane Memory Module
on page
29
).
5.
Remove the heat sink/fan assembly (see
Heat sink/fan assembly
on page
35
).
6.
Remove the second display transfer board (see
Second display transfer board
on page
38
).
7.
Remove the power connector board and bracket (see
Power connector cable
on page
39
).
8.
Remove the system board (see
System board
on page
41
).
Remove the thermal shield:
1.
Remove the Phillips M2.0 × 2.5 screw
(1)
that secures the shield to the computer.
2.
Remove the thermal shield from the computer
(2)
while pulling the antenna cable through the hole in
the shield
(3)
.
Reverse this procedure to install the thermal shield.
Component replacement procedures
45