HP OmniBook 7100 HP OmniBook 4100 - Reference Guide Windows 95 & Windows N - Page 74
Using PC Cards
View all HP OmniBook 7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Making Connections Using PC Cards Using PC Cards This section describes how to ♦ Insert and remove a PC Card. ♦ Select a compatible PC Card from a list of tested cards. To insert and remove a PC Card Note Windows NT 4.0 does not support zoomed video. If you are using Windows NT 4.0, make sure you've installed Card Executive (see page 1-106 for instructions). The OmniBook PC Card slots are available for storing data and expanding the communication capabilities of the OmniBook. The OmniBook supports standard Type I, II, and III PC Cards (PCMCIA and CardBus). You can use two Type I or II cards or one Type III card. Both slots support Zoomed Video, which allows high-quality multimedia presentations. 1. Hold the card with its face up and its connector holes toward the card slot. 2. Slide the PC Card into the slot until it is flush with the OmniBook. 3. To remove the card, click the PC Card indicator in the taskbar, then click Stop (for Windows 95 only). This protects your data and avoids unexpected problems. You can restart the card by removing it, then inserting again. 4. Press the eject button to pop the card out. 1-74