HP P3005 HP LaserJet P3005 - Software Technical Reference - Page 289
Allow Manual Duplexing, Printer Memory, Printer Hard Disk, Job storage, Mopier Mode, Installed
UPC - 882780566361
View all HP P3005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
The HP LaserJet P3005 printer supports smart duplexing. The device uses the smart duplexing feature to detect information on both sides of the print job pages and only runs the pages through the duplexing unit if printable information appears on the second side of the page. Allow Manual Duplexing Select Allow Manual Duplexing to print on both sides of any size and most types of media (except transparencies, envelopes, and labels). To use this feature, reinsert the media stack into the input tray to print the second side. The device pauses while the user makes this adjustment. This setting is enabled by default. Printer Memory This option matches the setting to the amount of memory that is installed in the device. The driver generates ranges of memory that can be selected, up to the maximum that the device can accept (320 MB for the HP LaserJet P3005 printer). The driver can use this information to manage how the print driver uses the device memory. Printer Hard Disk NOTE A printer hard disk is optional for the HP LaserJet P3005 printer. Do not select the Installed setting unless a hard disk is installed. Job storage When Job Storage is enabled, the device can store print jobs so that you can gain access to those print jobs later at the control panel. Mopier Mode The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the device once, and then storing it in memory. The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. NOTE The Mopier Mode function is not available without a hard disk. The HP LaserJet P3005 supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled. Use the HP PCL 6 Unidriver, HP PCL 5 Unidriver, or PS Emulation Unidriver to perform mopying in one of two ways: either through the software or through the device hardware. When the mopier is enabled, mopying takes place through the device hardware by default. One copy of a multiple-page print job is transmitted once through the network to the device, together with a printer job language (PJL) command directing the device to make the specified number of copies. When the mopier is disabled, mopying is not necessarily disabled. The driver can perform mopying through the software rather than the device hardware (the mopying path that is disabled when you change the Mopy Mode setting to Disabled). However, sending a multiple-copy print job when the mopier is disabled eliminates the advantage of transmitting the print job once, because the job is sent through the network for each copy. HP unidrivers for Windows ENWW Device Settings tab features 265