HP P4000 9.0 HP StorageWorks P4000 SAN/iQ Command-Line Interface User Manual - Page 1
HP P4000 Manual
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CLIQ The SAN/iQ Command-Line Interface User Guide Overview The SAN/iQ command-line interface (CLI) is built upon the SAN/iQ API released with version 8.x. Develop your own automation, scripting and management using the CLI. For instructions about using the CLI, see the Syntax section, immediately following this introduction. The section on Global Parameters describes functionality that applies to the entire CLI and includes commands to customize global operations. System Requirements Windows Server 2003 SP1 Windows Server 2003 R2 Windows Server 2008 R2 Windows XP SP2 Windows Vista 10 MB available space Installing the CLI Install the CLI from the HP StorageWorks P4000 Management Software for Microsoft Windows DVD. The installation wizard automatically installs the command-line software to the following default location in Windows: C:\Program Files\HP\P4000\HP P4000 CLI and sets the environment variable. Sample Scripts You can obtain sample scripts from the HP website: www.hp.com/go/P4000downloads. On-System CLI The CLI is installed on storage systems and can be accessed by SSH. Log in to the on-system CLI using the system IP address and the designated port 16022. If logging in from a command line, you must type the following command: ssh -p 16022 -l Commands AX696-96026 November 2010