HP P4000 9.0 HP StorageWorks P4000 SAN/iQ Command-Line Interface User Manual - Page 50
createSnmpTrapTarget
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
createSnmpTrapTarget This command creates an SNMP Trap Target. The Community String must be the same for all Trap Targets. If no Trap Targets exists, the Community String is used, otherwise it is ignored and the Community String of existing Trap Targets is used. Availability: Windows, SAN/iQ Required Parameters: login The IP address or DNS-resolvable names of one or more storage systems userName The authentication user name for the group passWord The password for the group keyFile The encrypted key file (this is specified instead of the username and password parameters) ipAddress The IP Address of the target. version The SNMP Version. 1 - Version 1 2 - Version 2 3 - Version 3 communityString The SNMP Trap Target community string Optional Parameters: none Example Command: cliq createSnmpTrapTarget login=10.0.1.3 userName=admin passWord=secret ipAddress=10.0.10.25 version=1 communitystring=TrapString 50