HP P4000 9.0 HP StorageWorks P4000 SAN/iQ Command-Line Interface User Manual - Page 83
getPerformanceStats
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
getPerformanceStats This command returns performance monitoring statistics. Availability: Windows, SAN/iQ Required Parameters: login The IP address or DNS-resolvable name of a storage system userName The authentication user name for the storage system passWord The password for the storage system keyFile The encrypted key file (this is specified instead of the username and password parameters) Optional Parameters: interval The interval in between counter sampling in milliseconds. Defaults to 6000. Note: because the internal sampling frequency is 6 seconds, it's not recommended to set this value less than 6000 Example Command: cliq getPerformanceStats login=10.1.2.3 userName=admin passWord=secret 83
83
getPerformanceStats
This command returns performance monitoring statistics.
Availability: Windows, SAN/iQ
Required Parameters:
login
The IP address or DNS-resolvable name of a storage system
userName
The authentication user name for the storage system
passWord
The password for the storage system
keyFile
The encrypted key file (this is specified instead of the username and password parameters)
Optional Parameters:
interval
The interval in between counter sampling in milliseconds. Defaults to 6000.
Note: because the internal sampling frequency is 6 seconds, it's not recommended to
set this value less than 6000
Example Command:
cliq getPerformanceStats login=10.1.2.3 userName=admin passWord=secret