HP P4000 9.0 HP StorageWorks P4000 SAN/iQ Command-Line Interface User Manual - Page 119
modifyVolume
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
modifyVolume This command modifies volume settings. Availability: Windows, SAN/iQ Required Parameters: login The IP address or DNS-resolvable names of one or more storage systems userName The authentication user name for the group passWord The password for the group keyFile The encrypted key file (this is specified instead of the username and password parameters) volumeName The name of the volume to modify Optional Parameters: description A description for the volume created replication The replication level for the volume (1|2|3|4) minReplication The minimum replication allowed for the volume before it goes offline (1|2|3|4). Note: the minReplication value must be equal to or less than the replication value on the volume. parity The number of parity storage systems for the data on this volume. This enables parity network RAID on the volume. Replication and parity are supported in the following combinations: replication:1, parity:0 Network RAID-0 (None) replication:2, parity:0 Network RAID-10 (2-way Mirror) replication:3, parity:0 Network RAID-10+1 (3-way Mirror) replication:4, parity:0 Network RAID-10+2 (4-way Mirror) replication:2, parity:1 Network RAID-5 (Single parity) replication:3, parity:2 Network RAID-6 (Dual Parity) thinProvision 119