HP Pavilion 10-n100 Maintenance and Service Guide - Page 38
Audio board
View all HP Pavilion 10-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Audio board Description Audio jack board (includes cable and double-sided adhesive) Spare part number 814721-001 832765-001 Before removing the audio jack board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 26). 5. Disconnect the battery cable from the system board (see Battery on page 28). Remove the audio jack board: 1. Release the ZIF connector (1) to which the audio jack board cable is attached, and then disconnect the audio jack board cable from the system board. 2. Detach the audio jack board cable (2) from the display panel assembly. (The audio jack board cable is attached to the display panel assembly with double-sided adhesive.) 3. Remove the two screws (3) that secure the audio jack board to the display panel assembly. 4. Remove the audio jack board (4) and cable. Reverse this procedure to install the audio board and cable. 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts